High temperature Stainless steel Tortoise Shell Mesh(Factory)

Specifications Tortoise Shell Mesh:

(1)Material:Stainless Steel

(2)Corlor:silver

(3)Hole Spacing:2cm-6cm

(4)Nets thick:1cm-2.5cm

Stainless steel Tortoise Shell Mesh :   1.Introduction:   The tortoiseshell network is divided into the mud claw shells network,the network of high-temperature tortoiseshell, stainless steel hexsteel, carbon steel (A3F) tortoise-shell net exceptional circumstances 0Cr13 material, use thefirst Tortoise Shell outlets welded on theinner wall of the boiler or hot air, and then smearre fractories.   2.Material: A general carbon steel 0 Cr13. 1 Cr13. 0 Cr18Ni9. 1Cr18Ni9Ti
3.Color:silver   4.Specification: (1)WireDiameter:1.0-3.5mm (2)Mesh spacing:2-6cm (3)Nets thick:1cm-2.5cm (4)Plate thickness:1mm-3mm   5.Surface finish:galvanized   6.Features: Mud clawtortoise-shell net down significantly, and enhance the ability of anchorage andlining materials. So as to effectively enhance the lining materials own linkperformance, and can completely control heat insulation peeling and easy tofall off phenomenon, improve the combination of lining material fastness.   7.Usages: Widelyused in petroleum chemical used in large device, especially to the device ofmain equipment of catalyst structure of the main parts of the lining, it canimprove the abrasion resistance and strength of the lining, wear-resistinglining with tortoise-shell net and solid, general site with the use of carbonsteel (A3F)tortoise-shell net, such as reactor and a secondary cyclone separator, U tuberegenerators, pipe place, high temperature parts with alloy (1 Cr13)tortoise-shell net, such as renewable emulators, and a secondary place such asthe cyclone separator. The tortoise shell network 20 * 17.5 mm steel with a hexagonal grid blunt,fixed in the nail plate heat preservation.     Tortoise Shell Mesh Specification:  

Plate Width(mm)	Aperture (mm)	Plate Thickness(mm)	Weight(kg/m2)
8	40*40	1.20	4.0
10	40*40	1.20	5.0
15	50*50	1.50	7.6
15	50*50	1.70	9.0
20	50*50	1.75	12.0
20	50*50	2.00	13.0
25	50*50	2.50	15.2

      8.Drawings: 9.Common specifications:    

Plate Width(mm)	Aperture (mm)	Plate Thickness(mm)	Weight(kg/m2)
8	40*40	1.20	4.0
10	40*40	1.20	5.0
15	50*50	1.50	7.6
15	50*50	1.70	9.0
20	50*50	1.75	12.0
20	50*50	2.00	13.0
25	50*50	2.50	15.2

                      10.Pictures for your reference:   If you have any other need, please contact us without hesitation, or you can visit our website. Your satisfaction is our mission.

Contact us if you need more details on stainless steel wire mesh. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 316 Stainless Steel Mesh、Stainless Steel Knitted Mesh. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Other kinds of products > Heat insulation lining