Electric tubular heating element for electric water heater
Basic Info
Model No.: JD24 800W+1400W/220V
Product Description
Product Introduction
Electric tubular heating element for electric water heater
JIEDA thick film heating element Ferro design and manufacture thick film heaters. Heaters consist of a metal core, coated (enameled) with a glass-ceramic lining. The glass-ceramic provides electrical insulation and carries the screen printed (conductive) heater tracks.
Our thick film heating elements are custom designed to suit your application. Shape, size and electrical properties can be set and optimized for each heating job. In addition we can provide electrical connectors, thermal sensors, temperature limiters and controls. Also we are experienced in assisting in solutions for installation of thick film heaters in appliances.
Electric tubular heating element for electric water heater is an intelligent temperature control thick film heating body. It can work with the PCB circuit control system, so that the pre-set temperature and hot water quantity can be decided.
The advantages of thick film heating element
Stainless Steel thick-film heating tubes of ANDETONG® series manufactured by company JIEDA are tubular structures, that allows rapid water flow and instant heat carrying. Under the same conditions, ANDETONG® series has many application advantages, such as large heating area, high heat conduction efficiency (≥98%), rapid thermal response (≥80 ℃~150℃/S), long working life (≥10000 hours) etc..
The Advantages of JIeda's thick film heating element
1, Safe and durable high strength: stainless steel substrate, Multi-layer microcrystalline vitreous insulation.
2, Fast heating: heating circuit has temperature rise over 80~150 degrees per second.
3, High utilization rate of heat: directly rapid-heat stainless steel tube, a big heat exchange area, fast replacement, efficiency up to above 98%.
4, Green and environmental protection: pure resistive load, no electromagnetic radiation, good for human body and mind.
5, Special tubular heating structure not only provides a great convenience for special application areas, but also provides an irreplaceable condition for the development of new products.
6, Customized services: we tailor-make electric heat products and provide application solutions for enterprises.
1)It can realize three different power, such as 800w,1400w,2200w on one heating tube, which means you can connect the suitable power with your requirement.
2)Power can be selected to provide a high-quality solution for achieving low-temperature effluent, and it can make sure the stability of water outflow with different temperature.
3)We use wire socket to connect wires, which is different with old method welding, and it can make the connecter more stable and safety.
4)JD24 AC220V/(1400W+700W) thick film heating element is an intelligent temperature control thick film heating body, which can work with the PCB circuit control system, so that the pre-set temperature and hot water quantity can be decided.
Product Parameters
Product Model | JD24 (1400+700)W/220V | Product application | Water dispenser/Water purifier |
Product Size | 175mm*48mm*56mm | Fixing manner | Fix from sides/Fix from end |
Tube Size | 024mm*125mm | Water inlet&outlet connector size | Φ9.5mm |
Standard Power/Voltage | (1400+700)W(+ 5% ~ -10%)/220V | Lead time | 25 Days |
Optional power | ≤2100W | MOQ | 1000 pieces |
Electric strength | ≥1250V/5mA/60s | Main Components | Heating tube/connector/thermostat, Temp.sensor/sprial column |
Bearing Pressure | ≤0.2Mpa | Product certification | CQC,ROHS,Wading health approval documents |
Use Precaution
2, The pipe must be installed vertically when heating liquid, the direction of liquid flow is from the bottom up. To avoid local dry burning, please add water at first, and then connect to power.
3, Based on different powers, the user should ensure the minimum flow, while ensuring smooth water access to the pipe, so as to avoid vaporization and dry burning.
4, Pay attention to the surface heat dissipation; and due to a big power density, please also pay attention to the rate of heat exchange.
1, The product temperature rising rate is greater than 80 ℃~150℃/S, so, please ensure that the tube is filled with water before use.
Product Categories : Heater Category By Application > Instant Heater For Water Purifier